Scantronic 8136 Guia do Utilizador descarregar pdf (Página 34)

34 496256 Issue 1

6. Supervisor

7. Press Enter until the display shows:

U14:DURESS CODE

DISABLED

8. Press A or B to change from "DISABLED" to "ENABLED".

The display shows: U14:DURESS CODE

ENABLED

9. Press Enter.

The system saves the change and the top line of

the display shows: U14:SYSTEM USE

If you want to remove a duress code from a user number, follow steps 1 to 9

again but at step 8 press A or B to change the bottom line of the display to

"DISABLED".

Giving a User Arm Only Access

1. Start menu 8.

2. Press Enter until the top line of the display shows "U01:SYSTEM USE".

3. Press A or B until the display shows the correct user number (or key in

the user number directly).

The display shows (for example): U02:SYSTEM USE

FULL USE

4. Press Enter.

The display moves the cursor to the bottom line: U02:SYSTEM USE

FULL USE

5. Press A or B to change between "FULL USE" and "ARM ONLY".

6. Press Enter.

The system saves the change and the top line of

the display shows: U02:OMIT ZONES

Allowing a User to Omit Zones

1. Start menu 8.

2. Press Enter until the top line of the display shows "U01:OMIT ZONES".

3. Press A or B until the display shows the correct user number (or key in

the user number if you already know it).

The display shows (for example): U02:OMIT ZONES

NOT PERMITTED

4. Press Enter.

The display moves the cursor to the bottom line: U02:OMIT ZONES

NOT PERMITTED

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Sem comentários

Scantronic 8136 Guia do Utilizador Página 34