Scantronic 4603 Guia do Utilizador descarregar pdf (Página 6)

6 of 12 496368 Issue 1

Zone 1 Entry/Exit zone/part set/auto restore (PIR)

Zone 2 Part set/entry route zone/auto restore (PIR, VIPER)

Zone 3 Part set/entry route zone/auto restore (PIR, VIPER)

Zone 4 Auto restore (PIR, VIPER)

Zone 5 Auto restore (PIR, VIPER)

Zone 6 Nothing selected (i.e., full set only door contact)

Zone 7 PA/auto restore (Pendant or hand-held PA)

Zone 8 Fire/auto restore

All other defaults are shown in the Engineer Program Command list by a ‘y’.

Engineering Program Commands

To change: Key in: Then: Notes Default

Engineer Access Code 20 ENTER nnnn ENTER See note 1 7890

Consecutive Code Jamming 32 ENTER Any* ENTER See note 2 ON

Instant Night Mode 33 ENTER Any* ENTER See note 3 OFF

Remote Set 34 ENTER Any* ENTER Zone 8 LED shows status ON

First Zone Lockout 35 ENTER Any* ENTER See note 4 ON

Part Set Exit Timer 41 ENTER 1 ENTER = 10 seconds

2 ENTER = 20 seconds y

3 ENTER = 40 seconds

4 ENTER = 60 seconds

5 ENTER = Continuous

6 ENTER = Instant (1.5s bleep

followed by 20s silent)

Bell Duration Timer 42 ENTER 1 ENTER = 1.5 mins

2 ENTER = 3 minutes

3 ENTER = 5 minutes y

4 ENTER = 10 minutes

5 ENTER = 15 minutes

6 ENTER = 20 minutes

7 ENTER = Continuous

8 ENTER = 10s (for testing only)

Entry Timer 43 ENTER 1 ENTER = 10 seconds (see note 5)

2 ENTER = 20 seconds y

3 ENTER = 40 seconds

4 ENTER = 60 seconds

Full Set Exit Timer 44 ENTER 1 ENTER = 10 seconds

2 ENTER = 20 seconds y

3 ENTER = 40 seconds

4 ENTER = 60 seconds

5 ENTER = Continuous

6 ENTER = Final door or 60 seconds

Engineering Program Commands 4600

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Scantronic 4603 Guia do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Scantronic 4603