Scantronic 808 Guia do Utilizador descarregar pdf (Página 29)

Administration

Page 27

Set Date and Time

You will need to re-program the date and time if the control unit

looses power for an extended time, and the battery is exhausted.

1. Enter the System Config menu and select Set Time/Date.

The top line of the display shows “Set the date” and the

bottom line shows the current date in number format

(day/month/year). The day is highlighted.

2. Key in the digits for the day/month/year. Press Y when you

have finished.

The top line of the display shows “Set the time” and the

bottom line of the display shows the current time in 24 hour

numerical format (hours: minutes). The hours are

highlighted.

3. Key in the hours and minutes. Press Y to finish.

Note: The internal clock does not change for daylight saving.

Loudspeaker

You can make the tones from the internal loudspeaker louder or

softer:

1. Enter the Menu and select

System Config - Loudspeaker.

The top line of the display

shows “Loudspeaker” and the

bottom line of the display

shows a row of stars.

Loudspeaker

[**** ]

2. Press > to increase the volume

or < to decrease the volume.

The loudspeaker volume

changes and the display shows

the change by increasing or

decreasing the number of

stars, for example:

Loudspeaker

[**********]

3. Press Y to finish.

1 2 ... 24 25 26 27 28 29 30 31 32

Sem comentários

Scantronic 808 Guia do Utilizador Página 29