Scantronic 8136 Guia do Utilizador descarregar pdf (Página 8)

8 of 44 496339 Issue 1

The 8136 main PCB has facilities for connecting:

Four keypads.

Eight 2-wire FSL detector zones.

Siren (4-speaker 16 ohm).

Four outputs.

If you wish to connect extra detector zones you can fit either an eight zone

FSL Expander Card, or 32- or 128- zone IDIS Expander Cards. Figure 4

shows the main connector on the 8136 PCB. Subsequent sections describe

how to wire keypads, FSL, and IDIS zones.

Wiring Keypads

All keypads must be connected either to Keypad terminals on the main PCB

or "daisy chained" to other keypads. Figure 5 shows the connections.

Figure 5. Wiring a 930 or 931 Keypad

Important: Please do not connect other devices (for example SAB, speakers , or IDIS

bus lines) in the same cable as the remote keypad wiring.

Wiring Keypads 8136

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Sem comentários

Scantronic 8136 Guia do Utilizador Página 8