Scantronic 9800+ Guia do Utilizador descarregar pdf (Página 2)

2 of 14 496334 Issue 1

Introduction

The 9800 Alarm Control Panel comprises a control unit in a shielded case,

and up to four separate keypads.

The control unit provides:

° Connections for up to eight Closed Circuit zones.

° Connections for four outputs (external sounder, strobe, and two fully

programmable outputs).

° Connections for up to four 9825 Keypads.

° Pins for fitting a plug-on communication device. Any device that

complies with the Scantronic plug-on footprint can be fitted.

° Internal sounder loudspeaker output with electronically generated

Chime, Alarm and Fire tones.

The programming interface is arranged as a set of two-digit numbered

commands.

The system can provide for up to 4 separate users. User facilities include:

° Three different security levels (full set and two part sets) which can be

programmed by the installer.

° User programmable Duress code.

° Keyswitch setting/unsetting.

Technical Specifications

General

Operating temperature = -10 °C to + 40 °C.

Humidity = Up to 80% non-condensing.

Dimensions = h x w x d 300 x 300 x 75 mm.

Weight = 4.85 Kg (excl battery).

Standby Battery = 12 Volt, 6.0Ah rechargeable lead-acid, Gel

Type battery.

Power Supply

The total current available from the control unit is as follows:

System output current = 800mA (Ambient Temp. 20 °C).

Control unit pcb = 60mA quiescent.

= 500mA active (when driving standard

external bell).

Each 9825 Remote Keypad = 20mA quiescent.

= 60mA active.

9800

1 2 3 4 5 6 7 ... 13 14

Sem comentários

Scantronic 9800+ Guia do Utilizador Página 2